【 use Application 】 :

The company is the industry well-known high-speed stranded wire (beam wire) machine professional manufacturers, after years of development and production, and has formed a whole series of mature model, in order to adapt to all kinds of customers of different specialized needs, this series of machine design is exquisite, the craft is mature, reasonable structure, stable operation, good quality, high efficiency, energy saving by customers praise, can widely used in all kinds of soft/hard conductor line (copper wire, wire, tin wire, copper clad steel, copper clad aluminum, etc.) and electronic line twisted, such as: the power cord, telephone lines, audio line, video line, auto line, network line, etc.

The technical features Technique Feature 】 :

1. The highest spindle speed for 1800 RPM.

2. Automatic tension control: stranded wire, the line from the receipt of the spring form tin move the line tension should be continuously increasing, and the function of automatic tracking control take-up tension; Make the whole plate take-up tension uniform, and at the same time, the machine can not stop control tension.

3. Host for oil lubrication, the natural circulation cooling, prolong the service life of main shaft bearing.

A line system adopts the new structure, conductor from the spindle roller direct line to bow wear, minus the aluminum plate on the corner of the wheel failure and cause scratches and jump shares phenomenon.

4. Machine has three word press device, ensure the stranded conductor the roundness of the insulation material, reduce the loss.

5. The machine using synchronous belt transmission, built-in no lubrication points, keep clean, stranding machines without pollution, adapt to all kinds of surface cleanliness requirements higher line of conductors twisted.

6. Adjust lay only need to change a lead take wheel, adjust the ground to just open reversing lever, simple in operation, so as to reduce the operating ShiWuLv and working intensity. · the bearing adopts Japanese famous brand, bow with the new material production, soft good running at high speed, avoid the vibration cause jump strands, frequency converter, PLC, magnetic powder clutch, electromagnetic brake, hydraulic jack, etc are imported famous brand, reduce the failure rate and maintenance costs.

The technical parameter Technique specifications 】 :

specifications

HML - 630 p

use

To adapt to the bare stranded wire, tin wire, copper clad aluminum, enameled wire, alloy wire and twisted.

Rotating speed

1800 r/min

To wire diameter

φ 0.23 - phi 0.64 mm

Twisted sectional area

0.8-6.0 mm

lay

11.15 ~ 60.24 mm and section

Winding shaft

Φ 630 mm x 380 mm x 80 mm (according to your drawings production), USES the manual pump hydraulic lift

Drive motor

10 HP motor and frequency converter

Protest area

2850 * 1500 * 1660

Ground to

S/Z reversing can choose any, adjust the ground to only use hand pull row line device in reversing lever can, simple operation

Row line

Bearing type line line, row radial, the row spacing are adjustable

brake

The electromagnetic brake, internal and external bolt, the rice automatically brake

Tension control

Magnetic powder clutch control take-up tension, by PLC program controller to be automatic and harness regulation